
“More power, more sound“ is the objective: to build compos that don‘t make any compromises with durability or power handling but are compact enough to fit into almost every car.
The G5 compos present themselves in a new die-cast aluminum basket with a minimal installation depth. The clean deep-reaching bass fundament as well as the high power handling are due to the large ferrite magnets, cones made of woven Kevlar and excursion friendly double-roll Santo- prene surrounds. The power drive is rounded off with 30/ 36 mm voice coils made of CCAW wire and progressive spiders for peak power handling capacities and minimal distortions.
The 25 mm aluminum dome tweeter was geared to respond to all necessary sound frequencies and will convince you with a fine, clear treble reproduction and refined resolution. The sophisticated 6/6 dB crossover was designed even more compact; the high frequency level can be adjusted in four steps with a jumper on the crossover.
G5-compos will not only win you over with the installation dimensions and considerable power handling capacity: their specially designed grills, the glossy lacquered tweeters in the aluminum cast housing as well as the chromed, lasered pole pieces give the G5 series visual highlights.
...more Infos/Testreports
| Technical Specifications | ECP25-G5 | ECP26-G5 | |
| Peak Input Power | 175 Watts | 200 Watts | |
| Continuous Input Power | 150 W RMS | 175 W RMS | |
| Sensitivity (1 W/1 m) | 86 dB | 89 dB | |
| Nominal Impedance | 4 Ohms | 4 Ohms | |
| Frequency Response | 65 Hz – 25 kHz | 55 Hz – 25 kHz | |
| Cutout Diameter | 121 mm | 145 mm | |
| Mounting Depth | 73 mm | 80 mm | |
| Mounting Holes | 4 (Euro DIN) | 4 (Euro DIN) | |