- Plug & Play 2-way component loudspeaker system for VW T6
- 20 cm woofer with aluminum cone and 30 mm voice coil
- Strong strontium ferrite magnet
- 28 mm tweeter with fabric dome
- Crossovers with 12/12 dB/oct. filter at 3000 Hz
- Vehicle-specific connectors
- Nominal load capacity: 80 watts RMS
- Frequency response: 50 Hz - 22 kHz
- Impedance: 4 ohms
- Sensitivity: 91 dB
- Scope of delivery: 2 x woofers, 2 x tweeters, 2 x crossover
Vehicle-specific loudspeaker, perfect as a replacement for the factory loudspeakers of the VW T6: The 2-way component system EM-VWF2 whose sound, installation properties and connections are optimally matched to the Bulli. This loudspeaker system for vans, buses and motorhomes is 100% plug & play - so it can be exchanged for the original factory system with minimal installation effort.
The loudspeaker set is based on the large 20 cm woofers, which, with their powerful magnetic drives with 30 mm voice coil, ensure high efficiency and rich bass. Due to its stability and high natural resonance frequency, the aluminum membrane is perfect for detailed, precise music reproduction.
The 12 dB/oct. woofer filters are attached directly to the rear of the loudspeaker basket so that no further cables are required. It is installed in the front doors of the T6 via plug & play with the original plug.
The 28 mm tweeters reproduce even the smallest details and impress with their surround sound. The tweeters fit perfectly into the original installation location in the dashboard: They are mounted invisibly behind the original grilles and connect with the 12 dB / oct. crossover with precisely fitting plugs.
Scope of delivery: 2 x woofers, 2 x tweeters, 2 x crossover, nominal load capacity: 80 W RMS
|2-way 8" component speaker||
|Frequency response: 50 Hz – 22 kHz||
|Nominal impedance: 4 ohms||
|Sensitivity 1W/1m: 91 dB||
|Continuous power handling: 80 W RMS||
|Set content: 2 Midwoofer, 2 Tweeter, 2 Tweeter crossover||
Volkswagen T6 – 2015 - 2019>
Not suitable for T6 with Dynaudio Soundsystem